Home > Electronics >

BTI CAN Bus Gauge
BTI CAN Bus Gauge


 
Additional Views:


Our Price: $375.00
Part Number: BTI CAN Bus Gauge

Availability:: Usually Ships in 3 to 5 Business Days
Product Code: DM3425


ECU Type/Brand*:


Gauge Size*:


Qty:  
Description
 
The BTI CAN Bus gauge is a multi-function aftermarket vehicle telemetry display that fits in a standard 52 mm or 60mm (special order) gauge cup. This Gauge has 12 programmable screens that are capable of displaying more than 40 parameters. Not only do you have the ability to see many parameters on one gauge, but this also means that you don not have to purchase and wire in a bunch of additional sensors. The gauge also has the capability to display warning messages when you hit "boost cut" "lean cut" "oil pressure cut" and engine faults triggered by the ecu. Sold 1ea, gauge pod not included.

This gauge can be set up for:
AEM Infinity
ProEFI
AEM V2 / EMS 4
MoTeC M1
ECU Master
Haltech

The gauge connects to the CAN Bus with a simple two wire connection and then also requires ignition power and ground to function. Many aftermarket ECU harnesses already have a 4 pin connector which allow for simple plug and play integration.
Each gauge also has a 4 pin expansion connector which allows you to daisy chain up to 4 gauges spanning from 1 CAN and power termination from the ECU.
No more additional sensors to install and run through the fire wall. You will be able to see exactly what your EMS is sensing.
There are 12 simple screens that the user can assign a certain parameter or a select group of parameters on one of the multi-parameter screens. The gauges can be daisy chained together on the CAN bus and each gauge has a jumper for a termination resistor, which is the last device on the CAN bus.
The new G2 gauges have a new glare-free design and an integrated shift light that is programmable by gear.



Share your knowledge of this product. Be the first to write a review »