Home > Engine Management >

AEM Infinity-6 ECU With PNP Harness For 1JZ JZX100 VVTi
AEM Infinity-6 ECU With PNP Harness For 1JZ JZX100 VVTi

Additional Views:

Our Price: $1,899.00
Sale Price: $1,699.00
Savings: $200.00
Part Number: AEM 30-7106 with PNP Harness For 1JZ JZX100 VVTi

Availability:: BACKORDERED
Product Code: DM3568

2 Step Pressure Sensor/Hose Kit*:

Air Temp Sensor*:

Boost Control Solenoid*:

Cam Sensor Harness*:

Flex Fuel*:

Fuel Pressure Sensor*:

Included In Kit*:

Map Sensor*:

Mode Switch*:

Remote Tuning*:

Wideband Kit*:


AEM Infinity-6 ECU With PNP Harness For 1JZ JZX100 VVTi
This kit gives you all the features of AEM's Infinity 6 and adds a plug and play adapter harness for the 1JZ-GTE from the Toyota JZX100 VVTi. This kit is for the 1JZ with VVTi, but NOT with drive-by-wire. This kit is also available with options for a sensor package and boost control. This harness uses 4 connectors with 4 rows of pins in each connector, please check that the picture matches your engine harness connectors.

We have made a change to the cam sensor wiring because Infinity6 needs a separate ground for the cam and crank sensors to accurately pick up those signals and reject noise. Since the VVTi engine harnesses were pre-wired from the factory with a common ground, it can cause some trigger errors on some cars. To solve this issue we are adding a pnp harness for the cam sensor to go directly to our patch harness. We have two length options, depending on if you will be mounting the standalone in the engine bay as we intended (3ft), or lengthening your engine harness to put the ecu in the dash (6ft).

With the purchase of any AEM Infinity PNP standalone kit we will build a custom base map for your setup, and a consultation to help get you started and answer questions. We also have remote tuning packages available to make the car completely drivable with boost. We can also set up all sorts of advanced features, please feel free to call us for more details.

Infinity has it's own wideband driver built in, and a fuel pressure sensor is very important for accurate tuning and engine safety. It is required to get the wideband sensor with extension harness option, AND a fuel pressure sensor, for us to do any remote tuning. Even if we don't tune if for you, we still highly recommend these options.

The option for a 2 Step Pressure Sensor Kit includes a 2000psi AEM sensor and our Full Length Clutch Hose wit h an 1/8" port for the sensor. It has 10mm x 1.0 120 deg reverse flare fittings, and works with most Toyota/Lexus master and slave cylinders.

Every harness comes pinned for your Infinity 6 to control or monitor:

  • Boost control
  • MAP sensor
  • IAT sensor
  • Wideband sensor
  • Flex Fuel
  • Fuel Pressure

Additional pins are provided along with a pinout so that you can add other features as you choose.

*This pnp kit will NOT work with a non-vvti 1JZ motor, and will NOT work with with a JZX110 with drive-by-wire. We do have other kits available for those engines.

We can remote tune these for you like we were sitting in the passenger seat! Check out our remote tuning options by looking up item DM9000. Please email remotetuning@driftmotion.com for a more accurate quote on remote tuning, because different setups vary on the time/cost to remote tune it.

Share your knowledge of this product. Be the first to write a review »