Home > 1JZ & 2JZ Swap Parts >

DM Clutch Master Cylinder Kit for MK3 Supra 1986-92
NEW Driftmotion Clutch Master Cylinder Kit for MK3 Supra 1986-92


 
Our Price: $199.00
Part Number: DM Clutch Master Cylinder Kit for MK3 Supra


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: DM43


Clutch Hose*:

Master Cylinder Bore:

Qty:  
Description
 
NEW Driftmotion Clutch Master Cylinder Kit for MK3 Supra 1986-92

We use a Wilwood clutch master cylinder, with our black anodized CNC machined aluminum bracket, cap, and clevis. We have 3 different options for the master cylinder bore. This whole setup is proudly Made In USA. This master cylinder is NOT intended to fit the stock clutch hardline location. We recommend replacing the hardlines and stock lower flexible hose, with our Full Length Clutch Hose. This master cylinder comes with a 10mm X 1.0 reverse flare female fitting already installed.

The Full Length Clutch Hose can be added on in the drop-down menu. The optional Full Length Clutch Hose w/1/8" Pressure Port is for adding a 2000psi pressure sensor (sold separately), to activate a 2-step for launch control using a standalone ecu.

*5/8" is recommended for most Toyota/Lexus stock slave cylinders. This matches the bore of the original stock master, and works well with a stock slave cylinder, for stock clutches, or upgraded stock-style clutches.

*.700" is recommended for some aftermarket twin disc and super single clutches with an aftermarket hydraulic slave cylinder. This will give you a little bit more travel from the release bearing than a stock master.

*3/4" is only for a slave cylinder that is intended for that (usually from GM). You can potentially over-extend a slave cylinder, which could either make it leak, or push it out too far and possibly damage your clutch. Sometimes a pedal-stop is required. Please only order this if you know this is exactly what you need!


Share your knowledge of this product. Be the first to write a review »