Stage 1 or Stage 2 upgrade is a custom 54mm or 57mm billet compressor wheel with extended tips. This upgrade adds the capability of higher horsepower, is more cost effective, and spools fast. Upgraded 360 degree thrust washer, and VSR balanced. 54mm is best for the stock inlet pipe, or 57mm with an aftermarket upgrade inlet pipe.

Stage 3 Upgrade is our custom 57mm billet compressor wheel, AND a 57mm exhaust wheel upgrade! Upgraded 360 degree thrust washer with more contact area, a beautiful custom made high flow inconel exhaust wheel, a custom made billet compressor wheel with small center hub and extended tips, and the center section is VSR balanced after assembly for long life and high performance!
This upgrade is going to add the potential for a larger increase in horsepower over the stock setup with tuning and proper supporting mods.

All our turbo upgrades are VSR balanced, and include a balance sheet!

To send us your turbo for a rebuild: Please buy this item on our website, and put a copy of the invoice in the box with your turbo. Package the turbo very well, use plenty of packing material, and double boxing is recommended. Please remove the oil and coolant pipes from the turbo, we don't need those. Do not remove the wastegate actuator, we need to test it to make sure it operates correctly. If there is previous damage to the turbo that is not repairable, we will contact you upon disassembling the turbo and let you know (since these cars are very new damage would be unlikely).

Send the turbo (using an insured shipping service with tracking and signature required) to:
Driftmotion, Inc.
8975 Vernon Ave, STE D
Montclair, CA 91763
909-949-0459