Home > MK3 Supra >

Driftmotion Billet Oil Filter Adapter
Driftmotion Billet Oil Filter Adapter

Additional Views:

Our Price: $119.99
Sale Price: $109.99
Savings: $10.00
Part Number: Driftmotion Billet Oil Filter Outlet Adapter

Availability:: Usually Ships in 2 to 3 Business Days
Product Code: DM3608

Adapter Pipe*:

Oil Temp Sensor*:

Pressure Sensor*:

Turbo Oil Outlet Fitting*:

Fittings Options*:

NEW Driftmotion Billet Oil Filter Adapter!
Check out our newly designed oil filter adapter! This has a cool feature you may not have seen before, it has pre-filter and post-filter pressure/outlet/temperature ports! A typical sensor adapter sandwich plate only gives you pre-filter oil right from the pump, which is not good for a turbo oil feed. Our innovative new design allows you to run an 1/8 NPT temp sensor for oil temperature right out of the oil pump, and also an 1/8" NPT oil pressure sensor or turbo oil outlet after the filter. This item screws on in place of a standard 3/4"-16 oil filter on many Toyota, Lexus, and other Import and Domestic engines. For 3/4"-16 oil filter threads, with AN-10 ORB in/out, and dual 1/8" NPT ports. Also has a side port that comes with a plug, which could possibly be used for an additional turbo oil outlet. The O-ring is a durable Viton type that is 2.75" OD. It has -10 ORB ports so you can run AN-8 or AN-10 hoses (AN-10 recommended for most engines). CNC machined from 6061 billet aluminum, and made in USA! Please verify the oil filter stud on your block or stock oil filter housing does not stick out more than 10mm or 0.4". If it does you may need to shorten it, so that the new filter adapter will screw on all the way and not bottom out on the threads.

Select if you want an adapter pipe to replace the stock JZ oil filter housing and mount this unit directly on the block.
Select if you want AN adapter fittings for AN-8 or AN-10 hose ends.
Select if you want to add an AEM 1/8" NPT Oil Temp Sensor.
Select if you want to add an 1/8" NPT to AN-3 or AN-4 Adapter Fitting.
Select if you want to add an AEM or ProEfi 150psi Oil Pressure Sensor.

Right now it is only available in 3/4"-16 size, but we can eventually make a 20mm version if there is a demand for it. We also offer a nice billet remote oil filter housing to match, get it HERE.

ATTN: Be careful on hooking up the oil hoses, if you connect it backwords the anti-drainback valve in the oil filter will block all oil flow and cause immediate engine damage!
Remember on all brands and models of oil filter housings: IN goes to OUT, and OUT goes to IN!
If you are unsure about how to plumb your particular setup, please give us a call BEFORE you start the engine.

(Pictures are for illustration only, sensors and fittings are sold separately at additional cost)

We offer a replacement o-ring for this item HERE

Share your knowledge of this product. Be the first to write a review »