** BACK ORDERED **
NEW SC300/SC400 Manual Pedal Conversion Set. Now using Xcessive Manufacturing clutch pedal and bracket, with factory Lexus manual brake pedal, and the other items needed to make it a complete kit! If you want to convert your Lexus SC from auto to manual, here's what you need! Includes all the parts needed to install a new clutch pedal and a new manual brake pedal. This kit DOES NOT FIT RHD vehicles! For left hand drive only! We are using a new model master cylinder that offers plenty of clearance for the hose fitting!
Info About the Xcessive Manufacturing Clutch Pedal and Bracket:
If you're doing a 5 speed swap on your SC chassis, you're going to need one of these. It's the only affordable, readily available clutch pedal that's a direct bolt in for the JZZ30 and UZZ31 chassis requiring no modifications to the sheet metal on the car to mount it up, only some trimming on the sound deadening under the dash.
The main bracket is formed 1/8" steel and the hanging pedal arm is 1/4" steel on a 12mm pivot, simple, effective and more affordable the a factory ZZ part.We've also provided all the bolting hardware for the clutch mount and the master cylinder hook ups.
This Complete Manual Pedal Conversion Set Includes:
*Xcessive Manual Clutch Pedal and Bracket
*Hardware For Xcessive Bracket and Pedal to Master Cylinder
*Clutch Pedal Rubber Pad
*Factory Lexus Manual Brake Pedal (angled differently than automatic pedal for proper foot clearance)
*Brake Pedal Rubber Pad
*New Brake Pedal Pivot Bushings
*New Aisin Master Cylinder
(The clutch pedal was designed for a shorter rod and clevis than a factory master cylinder, so this new aftermarket master is required)
(There are no provisions for a clutch pedal switch, you just need to bypass the neutral safety switch wiring that went to the automatic transmission. You must already have the stock automatic brake pedal bracket and mounting hardware to use this kit)