 |
Full Length Clutch Hose WIth 1/8" Pressure Sensor Port. This hose has a 1/8" NPT Sensor Port for adding a 2000psi pressure sensor to have your standalone ECU turn on a 2-Step rev limiter. We have found this to be a much more accurate way of enabling a 2-step/antilag than trying to add a switch on the clutch pedal. This hose works with V160 and R154 transmissions in a Supra, Cressida, SC, GS, IS300, or even many Nissan vehicles. 120deg ends with 10x1.0 threads. It goes directly from the clutch master cylinder, all the way to the slave cylinder. Eliminates the need for the factory hard lines at the top and bottom. This hose is stainless braided with an outer jacket to prevent scratching on the paint and brake hard lines. We offer it with a black color outer jacket, or clear. Select if you want to add a pressure sensor from ProEfi or AEM.
We have a new option to change to a AN-3 90 deg fitting on one end, and also add 6" to the hose, for use with our hydraulic release bearing kits that come with our Super Single and Twin Disc clutches.
|
|
|
Excellent 
