Home > 1JZ & 2JZ Swap Parts >

Walbro 450LPH In-Tank Fuel Pump/Install Kit
Walbro 450LPH In-Tank Fuel Pump/Install Kit


 
Our Price: $139.00
Part Number: Walbro F90000262


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: DM2086
Qty:

Description
 
Walbro 450LPH In-Tank Fuel Pump INCLUDING Universal Install Kit. This pump can support upwards of 800 horsepower at the crank on race gas! The new 39/50 DCSS pump has been designed around the proven 39mm armature (motor) that has been used for many years, Coupled with the proven armature are two sets of turbine blades set in parallel on a single impeller shaft. This design allow fuel to pass through two high pressure pumping channels delivering fuel in a manner to work with the high pressure demand of today's direct injection system.

This pump is sometimes called a 416, 400, 480, 450, etc... don't get confused though, they are all the same pump, the only difference is the F90000262 is not intended for E85, and the F90000267 is rated for E85. The F9000274 pump has a higher pressure relief valve so it cam make more maximum pressure.

Technical Pump Specifications Overall pump length: 121mm Main Housing Dia.: 39mm Lower Housing Dia.: 50mm Fuel Inlet Dia.: 11mm OD Fuel Outlet Dia.: 11mm OD Flow rate: 400LPH @ 40PSI Test Voltage: 13.5 Volts

Proven Design - A design used in multiple OEM application for years. - Built to stringent OEM standards. - Designed around the proven 39mm armature used for many years. - Quiet running while achieving substantial fuel flow in comparison to other single stage turbine pumps on market today. - Ability to function with a greater range of conventional powertrains present in today's automotive performance market place. - Proven to work in the Pulse Width Modulation used in today's automotive performance market place.


Share your knowledge of this product. Be the first to write a review »